- 1 FRAME
Extra heavy duty 15 Kip frames allow to support allowable working leg loads of up to 15,000 lb (66.7 kN). These loads are substantiated by recommended by the Scaffolding, Shoring & Forming Institute. The sum of the screw extension on the top and bottom determines allowable working leg load. - 2 SCREW JACK TOP
Extension tubes, with or without adjusting collars, may be used either at the bottom or top of the frames.
- 3 JOIST
The HD base plate is intended to be used with the XHD Frames and gives a 7" x 7" 180 mm x 180 mm) footing to the XHD Frame legs for efficient load distribution. - 4 BEAM
Used to support steel and aluminum stringers. Two-way design permits placement of stringers either singly or lapped atop frame leg. Top plates include lock-in clips to secure beams. - 5 SCREW JACK BOTTOM
The HD coupling sleeve also fits over the XHD Frame legs for firm, aligned connections. - 6 CROSS BRACE
High strength braces make rigid frame erection easy. Frame spacing from 600 mm(2') to 3000 mm(12'). Lengths are available to satisfy all job conditions.
| ITEM | PART NO. | HEIGHT | WEIGHT |
|---|---|---|---|
|
HD FRAME, STEEL
|
4021 | 3 ft x 4 ft | 35 lb / 15.9 kg |
|
HD FRAME, STEEL
|
4022 | 5 ft x 4 ft | 60 lb / 27.2 kg |
|
HD FRAME, STEEL
|
4023 | 7 ft 6 in x 4 ft | 85 lb / 38.6 kg |
|
CROSSBRACE
|
4024 | 5 ft x 30 in | 7 lb / 3.2 kg |
|
CROSS BRACE
|
4025 | 7 ft x 30 in | 10 lb / 4.5 kg |
|
CROSS BRACE
|
4026 | 10 ft x 30 in | 12 lb / 5.4 kg |
|
COUPLING PINS STEEL
|
4027 | - | 2.0 lb / 0.9 kg |
|
SCREWJACK, STEEL BASE
|
4028 | - | 45.0 lb / 20.4 kg |
|
SCREWJACK, STEEL TOP
|
4029 | - | 25.0 lb / 11.3 kg |
|
BASE PLATE,STEEL
|
4075 | - | 6.0 lb / 2.7 kg |
|
BEAM, ALUM. 7 1/2" x 32'
|
4037 | - | 128.0 lb / 58.1 kg |
|
BEAM, ALUM. 7 1/2" x 20'
|
4038 | - | 80.0 lb / 36.3 kg |
|
BEAM, ALUM. 7 1/2" x 18'
|
4039 | - | 72.0 lb / 32.7 kg |
|
BEAM, ALUM. 7 1/2" x 16'
|
4040 | - | 64.0 lb / 29.0 kg |
|
BEAM, ALUM. 7 1/2" x 14'
|
4041 | - | 56.0 lb / 25.4 kg |
|
BEAM, ALUM. 7 1/2" x 12'
|
4042 | - | 48.0 lb / 21.8 kg |
|
BEAM, ALUM. 7 1/2" x 10'
|
4043 | - | 40.0 lb / 18.1 kg |
|
BEAM, ALUM. 7 1/2" x 9'
|
4044 | - | 36.0 lb / 16.3 kg |
|
BEAM, ALUM. 7 1/2" x 8'
|
4045 | - | 32.0 lb / 14.5 kg |
|
BEAM, ALUM. 7 1/2" x 7'
|
4046 | - | 28.0 lb / 12.7 kg |
|
BEAM, ALUM. 7 1/2" x 6'
|
4047 | - | 24.0 lb / 10.9 kg |
|
BEAM, ALUM. 7 1/2" x 5'
|
4048 | - | 20.0 lb / 9.1 kg |
|
BEAM, ALUM. 7 1/2" x 4'
|
4078 | - | 16.0 lb / 7.3 kg |
|
BEAM CLIPS
|
4072 | - | 0.25 lb /0.1 kg |
|
RETAINING CLAMP
|
4073 | - | 2.0 lb / 0.9 kg |
